How to Choose a Flanders Scientific Monitor: XMP vs DM Guide

Choosing a Flanders Scientific monitor comes down to two questions: do you need to master HDR, and where will the monitor live? FSI makes two families for that. The XMP Series is the UHD QD-OLED line for HDR and SDR mastering. The DM Series is the HD line built for production, quality control and HDR preview. This guide goes through both, with sizes and numbers checked against flandersscientific.com in October 2026, and tells you who needs which. For the brand overview, see our page on Flanders Scientific reference monitors in India.

XMP vs DM in one view

FSI rates its monitors by HDR capability. XMP monitors carry an HDR Compatibility Rating of Mastering. FSI says displays in that class qualify as Dolby Vision mastering monitors and have a peak luminance of at least 1,000 cd/m2. DM monitors are rated HDR Preview. FSI describes that class as designed for production and quality control, useful as a cost effective HDR previsualisation tool, with more limited peak luminance and contrast than a mastering display.

Point	XMP Series	DM Series
Resolution	UHD, 3840×2160	HD, 1920×1080 (DM242 is 1920×1200)
Panel	QD-OLED	RGB OLED on DM160 and DM220, wide gamut W-LED backlit LCD on DM211, DM231 and DM242
HDR rating	Mastering, Dolby Vision mastering monitor	HDR Preview
SDI inputs	4 x 12G/6G/3G/HD-SDI	2 x 3G/HD/SD-SDI
Best use	Colour grading, HDR and SDR finishing, client viewing	On set, DIT, QC, edit suites, broadcast control

XMP Series: sizes and numbers

All sizes below are diagonal, from the product pages on flandersscientific.com.

• XMP270: 26.5 inch UHD QD-OLED, about 1,000 cd/m2 peak, about 1.5 million to 1 contrast, 14.4 lb (6.5 kg). FSI says it qualifies as a Dolby Vision mastering monitor.
• XMP310: 31.5 inch, with the same panel specs as the XMP270, at 17.8 lb (8.0 kg). FSI’s home page tile rounds this to 31 inch, but the product page says 31.5 inch.
• XMP550: 55 inch, about 2,000 cd/m2 peak and about 4 million to 1 contrast.
• XMP551: 55 inch with a fourth generation QD-OLED panel, about 4,000 cd/m2 peak and about 8 million to 1 contrast, at 43 lb (19.5 kg).
• XMP651: 65 inch with the same fourth generation panel and numbers as the XMP551, at 54.8 lb (24.9 kg).

FSI explains the logic behind a range of sizes. The XMP270, XMP550 and the larger XMPs share the same QD-OLED panel technology and the same colour management system, so a DIT with a 26.5 inch monitor and a colourist with a 55 inch monitor can work with matching images. That helps when the director, the DP, the editor and the client each look at a different screen.

On the technology, FSI argues that other OLED types are either too dim for HDR mastering or lose colour volume at high brightness, and that QD-OLED avoids this because white is built from additive RGB. It also compares itself to full array local dimming LCDs, saying a per pixel emissive panel avoids backlight flare and halation. Those are FSI’s claims, and they match why the XMP is sold as a mastering display.

XMP C Series: the compact versions

The C models use the same panels as their XMP twins in a slimmer, lighter and cheaper chassis. FSI describes them as a better fit for broadcast control rooms, OB trucks and some post production work.

• XMP270C: 26.5 inch, 13.1 lb (5.9 kg), about 1,000 cd/m2.
• XMP310C: 31.5 inch, 16.0 lb (7.2 kg), about 1,000 cd/m2.
• XMP550C: 55 inch, 39 lb (17.7 kg), about 2,000 cd/m2.

All three carry the Mastering rating and are listed by FSI as Dolby Vision mastering monitors. The trade is a smaller, lighter chassis. Check the spec page for the exact model you want before you assume it matches its full XMP twin box for box.

DM Series: HD reference and HDR preview

The DM Series is for people who do not need a mastering display but still need an accurate, fast picture.

• DM160: 15.6 inch RGB OLED, 1,000,000 to 1 contrast, 400 cd/m2 at full screen, 5.8 lb (2.6 kg). The portable one for carts and field work.
• DM211: 21.5 inch LCD, 300 cd/m2, 10.4 lb (4.7 kg).
• DM231: 23.8 inch LCD, 300 cd/m2, 12.4 lb (5.6 kg).
• DM242: 24 inch LCD at 1920×1200, 400 cd/m2, 13.4 lb (6 kg).

FSI’s news page also shows a DM220, a 21.6 inch RGB OLED, in an item titled The DM220 OLED Returns For a Limited Time, dated September 2026. Treat it as a special run and ask for current status.

All DM monitors include Zero Delay Fast Mode, real time waveform and vectorscope that update every frame, and three HDR Preview modes: HLG, PQ with a hard clip near peak, and PQ with a soft highlight roll off. FSI notes the DM160 tracks the low end of the PQ curve well because of its OLED contrast, which makes it a good match for mastering displays in the 0 to 300 nit range.

HDR and SDR mastering: how each family handles it

If a client wants an HDR deliverable, the XMP is the monitor to grade on. FSI says these flagship displays meet the key benchmarks for finishing the majority of HDR deliverables, and its per pixel contrast is meant to show highlight and shadow detail without halos. XMP monitors also work as SDR reference monitors, so one display covers Rec 709 and HDR grades. The DM Series covers SDR work in HD, plus HDR checking. A DM160 in the DIT cart can show the HLG or PQ look on set, with the XMP in the grading suite acting as the authority.

Calibration is part of the choice. FSI says all its monitors are calibrated at the factory. XMP monitors add GaiaColor AutoCal, which profiles the monitor when you plug a supported probe into it, without a computer. A GaiaColor Analyzer QC tool is built into every XMP, and FSI says a full QC report appears on screen in as little as 60 seconds. The XMP also works with Calman and ColourSpace. FSI’s news also announces a GaiaColor Analyzer for DM Series monitors, so check that page for the DM details.

For DIT work, FSI notes that XMP monitors integrate with Pomfort Livegrade for real time Look LUT control across all four SDI inputs, so one XMP can act as a four channel LUT box.

Who needs which

• Colourists and finishing houses working in HDR: XMP270 or XMP310 for the grading desk, XMP551 or XMP651 for the client wall.
• Broadcast control rooms and OB trucks: XMP C models if you want UHD reference, DM models for HD.
• DITs and on set monitoring: DM160 for weight and OLED contrast, or a larger DM if the cart has the space.
• Editors, QC and edit suites: DM211, DM231 or DM242, depending on the desk and whether you need 1920×1200.
• Production houses with one budget: start with the job you have. If you never deliver HDR masters, a DM Series monitor does the daily work and an XMP can wait.

Where to buy Flanders Scientific in India

Colo Exim is the official distributor of Flanders Scientific in India. FSI is now part of the Atomos family, so you can also look at our Atomos page for the production monitors that sit alongside it. Our Flanders Scientific page sets out the XMP and DM models we can help with, and our brands page shows the wider list. Tell us your work, whether you grade, shoot or broadcast, and we will recommend the model, not the biggest box. Ask us for current availability.

Not sure whether you need an XMP or a DM? Make an inquiry or call us on +91 93204 96801.

Frequently asked questions

What is the difference between Flanders Scientific XMP and DM monitors?

XMP is the UHD QD-OLED line rated Mastering, with models that qualify as Dolby Vision mastering monitors. DM is the HD line rated HDR Preview, built for production, quality control and on set work.

Which Flanders Scientific monitor is best for HDR mastering?

The XMP Series. The XMP270 and XMP310 offer about 1,000 cd/m2 peak, and the XMP551 and XMP651 offer about 4,000 cd/m2 peak on a fourth generation QD-OLED panel.

What sizes does the XMP Series come in?

From flandersscientific.com: 26.5 inch (XMP270, XMP270C), 31.5 inch (XMP310, XMP310C), 55 inch (XMP550, XMP550C, XMP551) and 65 inch (XMP651).

What does the XMP C Series change?

The C models use the same QD-OLED panels as their XMP twins in a more compact and affordable chassis, aimed at broadcast control rooms, OB trucks and some post production work.

Is a DM Series monitor enough for on set DIT work?

For many jobs, yes. DM monitors offer Zero Delay Fast Mode, real time scopes and HLG and PQ preview. The DM160 weighs 5.8 lb and uses an OLED panel.

Does Colo Exim supply Flanders Scientific in India?

Colo Exim is the official distributor of Flanders Scientific in India. Send an inquiry with your workflow and we will recommend a model.